150 tons per hour limestone crushing and screening plant

January 28, 2021
Latest company case about 150 tons per hour limestone crushing and screening plant
150 tons per hour limestone crushing and screening plant

A customer from Ethiopia plans to build a 150-ton per hour crushing and screening production plant. After careful investigation and study, we make a crushing solution for the customer.

Customer requirements:
Capacity: 150TPH
Raw material: limestone
Raw material size: 550mm
Final Products: 0-4mm, 4-13mm, 13-19mm, 19-25mm four specifications of coarse sand and stone.

Working Procedures: After thorough communication with the customers, the coarse crushing, medium crushing,screening processes are finally used to produce four types of sand and gravel products. The raw materials are fed into the hopper though truck, then it is fed into the coarse crushing jaw crusher through the vibrating feeder. The stone is crushed and transported to the medium crushed impact crusher by the belt conveyor. Then the crushed material is conveyed to the vibrating screen. The qualified fine output sizes are screened out and conveyed out by the conveyor, the oversized material goes back to the tertiary impact for recrushing. This process forms a close circuit.

The main equipment of this production line is:
1 set of PE750×1060 jaw crusher;
2 sets of PF1214 impact crusher;
1YK2160 circular vibrating screen 1 set;
2 sets of 2YK1860 circular vibrating screen;
Auxiliary equipment: vibrating feeders, belt conveyors, control panel

The following is detailed working flow chart: